- 0.1 TOSHIBA TV Universal Remote 5 Digit Codes:
- 0.2 TOSHIBA TV Universal Remote 4 Digit Codes
- 0.3 TOSHIBA TV Universal Remote 3 Digit Codes
- 1 Toshiba Universal Remote Instructions
Finding out the Toshiba tv remote codes can be a tough task until you will get the complete list. And here in the post, I am sharing the complete guide with the proper working codes and the steps for the Toshiba TV. With the remote of Toshiba, you will get the manual or the card. It will tell you the proper guidelines just to finished this process. But even you don’t understand. You can read this amazing post. Here you will get each and everything with the proper description along with the working as well as the working Toshiba tv remote codes.
TOSHIBA TV Universal Remote 5 Digit Codes:
12006, 18206, 10003, 11656, 19443, 11256, 19114, 12724, 18016, 11524, 18943, 11156, 15532, 15969, 10832, 10149, 11265, 11369, 12667, 11936, 10093, 11704, 10845, 18418, 12294, 11945, 10060, 11916, 11356, 11959, 10154, 12615, 10036, 11635, 12109, 11306, 12134, 10736, 11743, 10822, 16219, 11343, 10156, 12305, 10650, 15716, 13403, 13504, 13115, 11918, 11210, 13517, 11325, 16921, 10856, 11935, 15355, 15412
TOSHIBA TV Universal Remote 4 Digit Codes
0983, 0973, 0394, 0398, 0924, 0260, 0358
TOSHIBA TV Universal Remote 3 Digit Codes
159, 120, 013, 049, 105, 178, 109, 118, 117, 089
Toshiba Universal Remote Instructions
- In the first step, you have to “Turn ON the TV” that you have control with the remote.
- Now you have to relocate the Toshiba codes for your TV.
- After that press and hold the TV button just for 3 seconds. IF the light flashes of the TV button then you are going with the correct steps
- You just need to enter the Toshiba universal remote code by using the number of the control just to control the TV. (you can get working codes from above list)
- Now press the “#” key with the help of the remote then you will see that the light flashes for 3 times
- IN the last, you need to press the button of power and you will see that your TV should turn off.
Programming Toshiba Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Toshiba Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
The procedure I have shared above can take very little time. It will definitely work for you. All you have to chase the above steps of Toshiba remote codes jus to program your very own Toshiba general remote. You just need to copy the code from here. As I have shared the most recent working codes that you can use for you.