TCL TV’s Universal Remote Codes & Instructions

In today’s post, we are going to talk about the tcl remote code. If you are finding for the tcl universal remote code to program the tcl universal tv remote, then you are at the ideal spot, here you can get the latest tcl tv codes. Everyone knows nowadays we don’t have time to manage one remote for each device.

That is the reason why universal remotes are the best option to operate all your devices. Because of the universal remotes you can easily operate and manage all your devices, likewise TV, music system, DVD or any other device.

TCL TV’s Universal Remote Codes List

NamesRemote Codes
Altice USA1111, 0821, 0001, 3411, 3311, 2801, 4141, 1931, 1661, 1561
ATT U-verse  1346
Bright House Cable  387,1756
Buckeye Broadband 12434, 2434
Cable One  2434 
Cablevision / Optimum  031
CenturyLink 2414, 2434, 3183
  11756, 12434, 12290, 12292
Cox Communications
  1756, 11756, 12434
DISH Network
  1756, 535, 645
Frontier Communications 688
General Communications0031, 0107, 0164, 0004, 0009, 0044, 0054, 0000, 0342, 0003, 0125, 0015, 0022, 0052, 0087
Google Fiber 2856
Hawaiian Telcom 2434
  12434,387, 12049
Time Warner
  387, 1566, 268
Verizon FIOS
Windstream 2414, 2434, 3183
GE Universal Remote
Model 24922
Inteset INT-422
Microsoft Xbox One  T1756

TCL TV’s Universal Remote Instructions

  • First of all, you must have to “Turn on your device”.
  • Now you should press the Setup button on your remote and hold it
  • Then enter the three-digit code that is 9-9-1
  • Now simply press and hold the “Power Button” until the device turns off.

Programming TCL TV’s Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming TCL TV’s Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.

The process I have shared above can take a few minutes to get done, but it will surely work for you. All you need to follow these steps and ge universal remote codes for tcl tv to program your own tcl universal remote. You can simply copy the working tcl remote code from here, I have shared all the updated and latest working codes that you can use for you/

Leave a Comment