Summit TVs – RV Universal Remote Codes & Instructions

RV Summit is not in one of the most popular universal remote control brands in the market. So in any case if you lost or damaged your TV remote, then you can make use of Summit universal remote control to program & operate your TV.

To program your remote for Summit TV you must require Summit remote control codes and follow the programming instructions correctly.  Usually universal remote codes are of 4 digit or 3 digit figures. Here we have updated summit tv code list of each and every type of remote codes so that if a code is not working for your remote, you can program using another code from the list.

Summit TV Universal Remote Codes List

Below is all the updated code list of Summit universal remote control which is working with summit TVs- RV television.  While programming you need to analyze your remote for which kind of codes it uses for setting up remote control otherwise you need to use all the codes till you find the right one.

3 Digit Summit TV Universal Remote Codes List

• 508
• 506

4 Digit Summit TV Universal Remote Codes List

• 1758
• 1043
• 0030

Summit TV Universal Remote Codes For DirecTV

• 10030

How to Program Summit TVs – RV Television Universal Remote

Follow the given programming instruction step by step and use working universal remote code to operate your device with remote control. There are three main methods of programming and all those are given here so if you find a method not working with your remote than choose from the alternative methods.

Programming Summit TV Universal Remote With Keycode Method

Through the keycode method you can easily program Summit TV universal remote and also it find outs the component model you are using.

1. “Turn on” the Device
2. Tap the “TV” on “Summit TV Universal remote”.
3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
4. Now enter the “Keycode” which you find from above mentioned list.
5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
6. Release the “Power Button” when the screen turns off.

Programming Summit TV Universal Remote With Code Search Method

1. “Turn on” your Device.
2. Then Click & hold the “Setup” button
3. Now enter “9-9-1”(3-digit code)
4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming Summit TV Universal Remote With Manual Setup

1. Place the device “Remote control facing Universal remote control you are willing to replace”.
2. Click the “Setup key” or “Magic”.
3. Enter “Code” from above provided list
4. Tap any key of functions which you like to “Program”. Example- TV volume up.
5. Now tap & hold the corresponding button on “Original Remote Controller”.
6. Lastly, A light will “Blink” which means the program saved successfully.
7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.

Conclusion

If you have any feedback about this article please share with us. We have updated remote codes of all the most used universal remote brands here on this website. So if you are searching for any other type of remote control codes then write us via comment section so we may include the new codes for you.