Spectrum Universal Remote Codes & Instructions

Whatever you do, you must follow a proper process. Same as when you are programming your own universal remote then you must have the working codes to use and you should follow the proper process only then, you will able to program your own Spectrum Universal Remote.

Spectrum Universal Remote Codes List

However, you are at the destination because here you can get the complete list of updated spectrum remote codes that you can simply copy from here. Then, all you need to follow the below process to program spectrum remote urc1160. You will all the code like spectrum cisco hda-rf2.2 and spectrum remote codes rc122 below.

Spectrum Universal Remote Codes For Dynex


Spectrum Universal Remote Codes For Insignia

2049, 1423, 1564, 0171, 0463, 1204, 1326, 1517, 1660, 1963, 2417, 2751

Spectrum Universal Remote Codes For LG

1423, 0178, 0017, 1768

Spectrum Universal Remote Codes For Magnavox

1867, 1454, 2597, 1755, 0171, 0051, 1365, 1913, 1963, 1990, 2492

Spectrum Universal Remote Codes For Panasonic

1480, 1927, 1947, 1925, 0051

Spectrum Universal Remote Codes For Philips

1867, 1454, 2597, 0171, 1365, 1990, 2492, 2622, 2992

Spectrum Universal Remote Codes For RCA

2434, 2746, 2932, 0047, 2183, 3382, 0051, 1661, 1958, 1959, 1868, 0090, 2855, 3577, 3717

Spectrum Universal Remote Codes For Samsung

2051, 1959, 0178, 0812

Spectrum Universal Remote Codes For Sharp


Spectrum Universal Remote Codes For Sony

0810, 1685

Spectrum Universal Remote Codes For TCL


Spectrum Universal Remote Codes For Toshiba

1524, 1343, 1369, 1935, 1959, 2684

Spectrum Universal Remote Codes For Vizio

1758, 2707, 0864, 1756, 0885

Spectrum Universal Remote Codes For Zenith

1423, 0178, 0047, 0017, 0463, 1661, 1365

How To Program The Spectrum Universal Remote

Without knowing the right way to do work, you cannot reach the endpoint. So, for your convenience here I am sharing the complete guide of steps to follow to program your spectrum remote. The complete methodology is given below. Just all you have to follow them one-by-one.

If you don’t want to manage so many remotes at once and want to have a smooth and headache-free experience of using your devices. Then you need to program a universal remote. Because only universal remote can work pretty well with all the devices you have in your home or anywhere else.

Programming Spectrum Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming Spectrum Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.

Let Us Know if you Have any Doubts about Spectrum  Remote

However, doing all the things wasn’t an easy task if you don’t have the working codes for this. But with the working spectrum remote codes it becomes easy and you did it very well. But for those who have any doubt in their mind. You can simply let us know by commenting below in the comment section, and we will answer all your queries as soon as possible. Well, now copy the given codes and follow the complete process. Because that is the only way to program your own universal remote.

Leave a Comment