The Soniq tv remote control has been a popular choice among individuals who wanted to manage the operation of multiple devices. It only takes a unique Soniq universal remote code which should be compatible with every device you wish to control. As soon as the setting up is successful, take a full enjoyment to operate one universal remote for Soniq tv and other devices.
Soniq TV Universal Remote Codes List
We provide the complete Soniq universal remote codes list where you can search and match the model and brand of your device you wanted to program the remote with. Each brand and model requires a different Soniq universal remote code. Take note that you need to take the programming separately and enter a different code every time if you wish to control multiple devices.
Soniq Tv Universal Remote 4 Digit Codes
1473, 0178, 0180, 0003, 0092, 0045, 0019, 0030, 0056, 0032, 0047, 0054, 0060, 0039, 2493, 3168, 1298, 3005, 3572, 1702, 2474, 1467, 3030, 3660
Soniq Tv Universal Remote 5 Digit Codes
But it’s not a problem at all because we have all the codes you need to setup the Soniq tv universal remote. Our codes list below has corresponding model and brand of different devices, so check them out first.
How to Program Soniq Universal Remote
One of the most important things to take note when programming the Soniq universal remote is the specific code which you need to enter during the procedure. If the first code is not working, you only have to keep trying until you saved the perfect code to operate your device. Normally a manual with instructions are enclosed when you buy a universal remote for Soniq tv. However if it happened that it was misplaced, we will provide you with the steps on how to program the Soniq universal remote. The procedure is very easy and will not need an expert to do the job for you.
Here are the instructions:
Programming Soniq Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Soniq Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
How this article has helped you? We wanted to hear from you. Please share with us the right code you have entered for which device so that you might of help to other readers who are experiencing the same. Let us know your mind by leaving us a comment below.