Skyworth Universal Remote Codes and Instructions

Do you wish to program your universal remote for Skyworth tv to work with other devices? The Skyworth remote has an amazing feature which can be programmed to operate other devices apart from Skyworth tv. This remote control for Skyworth tv only requires the needed codes to control other devices.

Skyworth Universal Remote Codes List

Our list of Skyworth tv remote codes are specifically collected in this article to help you when programming the device. If you want to operate more than one device using a single remote, it only requires a unique Skyworth tv universal remote code. The Skyworth tv code varies from one device to other because of different model number and brand.

Skyworth Universal Remote 5 Digit Codes

  • 16165
  • 00037
  • 11799
  • 00817
  • 13253
  • 00264
  • 00753
  • 17067
  • 00009
  • 00556

Skyworth Universal Remote 4 Digit Codes

  • 0264
  • 3253
  • 0037
  • 0701
  • 0696
  • 6191
  • 0817
  • 0009
  • 0556
  • 0748
  • 0727
  • 0753
  • 0698
  • 0691

Skyworth Universal Remote 3 Digit Codes

  • 202
  • 753
  • 817
  • 531

But once, you have saved the right Skyworth tv code, you can fully enjoy the features of your tv and other programmed devices. We provide the list of all the Skyworth tv codes and you only have to match it with your preferred device.

How to Program Skyworth Universal Remote

The only key to control a number of devices using a single Skyworth tv remote is to program it using compatible codes. The programming process does not need a tech savvy individual to assist you. This article will provide you with all the instructions you need to kick start with the programming.  Just take a closer attention to every step and follow all the guidelines stated below to reap positive results. One of the most important keys to take note in programming is the Skyworth tv universal remote code so better match your device carefully.

Here are the instructions on how to program the Skyworth universal remote:

Programming Skyworth Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming Skyworth Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.


Are you enjoying the programming procedure and found this article helpful? if you do, please let us know and share your experience here. Let us know what code you have used to successful paired with which device. Your experience might be of big help to other readers also. Leaving us a message below is the key.

Leave a Comment