- 1 Polaroid Universal Remote Codes List
- 2 How to Program Polaroid Universal Remote
The Polaroid universal remote using specific codes can control a number of devices apart from Polaroid tv. Yes, that’s right! You don’t need individual remote control for each device. A single Polaroid tv remote control can manage everything and operate a number of devices. Programming with the right Polaroid universal remote codes holds the answer.
Polaroid Universal Remote Codes List
If you are confused where to find the right Polaroid tv codes without having the manual, we have the complete Polaroid universal remote codes list for you. We have also listed the different brands and models of numerous devices with the corresponding code. All the codes we are giving here are compatible and match with the device listed.
Polaroid Universal Remote 4 Digit Codes
0150, 0178, 0765, 0775, 0865, 1004, 1276, 1480, 1523, 1991,
Polaroid Universal Remote 5 Digit Codes
10835, 21061, 21086, 31508, 10765, 10865, 11126, 11262, 11276, 11314, 11316, 11326, 11327, 11328, 11341, 11498, 11523, 11991, 11992
Polaroid Universal Remote 3 Digit Codes
Without the code, you cannot prosper in programming the universal remote for Polaroid tv. Every code for a specific brand and model has their own importance so be careful when matching the code. As soon as you access the right code, everything will just fall on their perfect places.
How to Program Polaroid Universal Remote
All the details and step by step procedure on how to program Polaroid universal remote is provided in this article. The process will only take a few minutes but as soon as you have succeeded, you will enjoy the luxury of maneuvering all your devices with a single universal remote for Polaroid tv. When programming, Polaroid tv remote codes play an important role. You will be prompted to enter the specific code for the device you wish to control. The correct code will be saved in the remote and you will enjoy using the features of your device.
Below are the steps on how to easily program Polaroid universal remote:
Programming Polaroid Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Polaroid Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
How did you find this article? We hope that we have helped you in programming the Polaroid universal remote with the above codes and instructions. If you have additional questions about Polaroid remote codes, just leave a message below. We are committed to offer you with the best experience in visiting our site.