Pilot Universal Remote Codes and Instructions

Have you heard lately that the Pilot tv remote is designed with features which can take control of other devices? Yes, that’s right! The Pilot remote control is designed to work with other devices using a corresponding code. It only requires that the code is compatible with the model and brand of your device.

Pilot Universal Remote Codes List

We have the full list of Pilot universal remote codes from which you can select the right one to match the brand and model of your device. All the codes in the list have corresponding model number and brand of device which will serve as your reference.  Each device bearing the model number and brand is listed in the pilot remote control code list. Likewise, the codes can also be accessed in the Pilot remote control user manual. For easy reference, the codes are normally made up of 3 digit numbers. You might be confused of the numbers but be keen enough to select the right code compatible with the chosen device.

Pilot Universal Remote 3 Digit Codes List

289, 004, 377, 460, 729, 427, 703, 926

Pilot Universal Remote 4 Digit Codes List

0004, 0586, 0067, 0742, 0736

How to Program Pilot Universal Remote

If you desire to organize all your devices to be controlled by a single remote, programming the Pilot universal remote is the answer. The procedure in programming requires a few minutes while the process itself is very simple. One big key in this process is to secure the right code compatible with the device you want the Pilot tv remote to control. Because the process requires a specific code to progress with the programming, you need to extra careful when entering the right code. Using a different code not compatible with your device will make you go back to the process and start the programming again. This entails hassle and waste of time.

Below are the step by step instructions you need to follow on how to program Pilot universal remote:

Programming Pilot Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming Pilot Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.

Conclusion

Have you picked up the perfect Pilot universal remote code which worked with your device? We are glad that this article has helped you to setup the remote compatible with your device. We would like to hear your experience. You can share with us by leaving a message on the comment box provided below.

Leave a Comment