Magnavox Universal Remote Codes & Instructions

If you want to program your Magnavox remote then definitely you need the Magnavox tv code. So here in this amazing blog, I am going to share the code list as well as the instruction that you need to follow just to apply the code. You can easily control your TV or the device by just using the Magnavox universal remote codes. So whats you are waiting for. Just scroll down below, and below you will get the proper instruction as well as the list of the codes so that you can use for the TVs, DVD and audio-video devices.

Magnavox Universal Remote TV Codes

1053, 1056, 1057, 1059, 1060, 1061, 1083, 1004, 1007, 1018, 1047

Magnavox Universal Remote Sound Bar Codes

32459

Magnavox Universal Remote DVD Codes

2245, 2293, 2318, 2320, 2321, 2327, 2002, 2018, 2089, 2237, 2241

Magnavox Universal Remote HDTV Codes

1372, 1414, 1329, 1358

Magnavox Universal Remote VCR Codes

3153, 3183, 3190, 3206, 3211, 3016, 3036, 3051, 3061, 3128, 3152

Magnavox Universal Remote Codes Complete List

Brand NameRemote Codes
ADMIRAL0021, 0043, 0030, 0023, 0040, 0017, 0042, 0051, 0019, 0057, 0018
ANAM0044, 0052
ANAM NATIONAL0029
AOC0017, 0023
CANDLE0023, 0026, 0048
CITIZEN0023, 0026, 0048
CONTEC0044, 0047
CRAIG0044, 0052
CURTIS MATHES0049, 0023, 0028
CXC0044
DAEWOO0017
DAYTRON0028
ELECTRON0028
EMERSON0063, 0042, 0041, 0044, 0054, 0045, 0056, 0043, 0028, 0047, 0046, 0059
ENVISION0023
FISHER0035, 0039
FUNAI0043, 0044
GE0027, 0022, 0085, 0083, 0061, 0066, 0049, 0074, 0075, 0082, 0084, 0019, 0021, 0052, 0029
GOLDSTAR0073, 0090, 0085, 0067, 0089, 0017, 0076, 0088, 0087, 0086, 0028
HITACHI0032, 0025, 0028, 0030
JC PENNEY0023, 0016, 0027, 0017, 0019, 0049, 0028
JVC0038, 0053
KLOSS0020
KTV0028, 0044
LXI0031
MAGNAVOX0011, 0008, 0003, 0000, 0001, 0005, 0009, 0010, 0013, 0006, 0004, 0012, 0007, 0002, 0017
PHILIPS0001, 0003, 0004, 0010, 0011, 0013, 0005, 0006, 0000, 0012, 0007, 0008, 0017, 0009, 0002
PHILCO0006, 0007, 0001, 0003, 0002, 0000, 0005, 0011, 0012, 0017, 0009, 0010, 0004, 0008, 0013
SYLVANIA0041, 0079, 0048, 0023, 0072, 0018, 0080, 0020, 0078, 0067, 0081, 0057, 0034, 0051
MARANTZ0023
MEMOREX0024, 0028, 0040, 0044
MGA0033, 0036, 0042, 0017, 0023
MITSUBISHI0042, 0060, 0017, 0033, 0036
MTC0017, 0023
NEC0017, 0023
PANASONIC0029, 0052, 0064
PIONEER0055
PORTLAND0028
PROTON0028, 0042
QUASAR0029, 0052
RCA0016, 0017, 0025, 0027, 0032, 0062, 0066, 0067, 0068, 0069, 0070, 0071, 0074, 0091
REALISTIC0024, 0028, 0040, 0044
SAMPO0023
SAMSUNG0017, 0023, 0024, 0028, 0065
SANYO0035, 0039
SCOTT0028, 0043
SEARS0031, 0035, 0039, 0040, 0049
SHARP0028, 0034, 0040, 0058
SONY0014, 0030, 0050
SOUNDESIGN0042, 0048
SSS0017, 0044
SYMPHONIC0043, 0044
TEKNIKA0017, 0026, 0033, 0043, 0044, 0048
TMK0042
TOSHIBA0035, 0037
TOTEVISION0028
UNIVERSAL0019, 0021
VIDTECH0017
WARDS0019, 0057, 0040, 0051, 0030, 0021, 0017, 0023, 0018, 0043, 0042
YAMAHA0017
ZENITH0015, 0077

Magnavox Universal Remote Instructions

  • You have to make sure that the batteries of the remote are properly working then “Turn on the TV”.
  • After that, you need to press and continuously hold the TV and the button of the SEL just for the “3 seconds”. You will see that the button will light.
  • Now with the lit of the button, you need to point the Magnavox universal remote at the TV side and need to enter the code of the digit which you ave have to choose from the list of the codes from above.
  • Just for the verification of the Magnavox remote codes, you have to press the VOLUME + button and this will turn the volume of the TV up.
  • You need to press the button on the TV and you will see that the button will blink twice.

Programming Magnavox Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming Magnavox Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.

Final Words

In today’s world, everybody is living such a busy and tough life. So just to make life easier, you can use the Magnavox universal remote codes. You just need to enter the code from the list and I am sure that after using the above straight forward process. You will not face any kind of error. But in case your code is not working then let us know.

Leave a Comment