Insignia DVD Player Universal Remote Codes & Instructions

Do you own a insignia dvd player and would you like to operate it with your universal remote because of any reason then this article will definitely helpful for you. You should need latest insignia dvd remote codes to program your remote control and access your dvd player with remote.  We have solved this issue for you by posting all insignia dvd player remote codes here on this webpage. So you just need to find the perfect insignia dvd player code from this list and follow the program instructions carefully and all done.

Insignia DVD Player Universal Remote Codes List

You can find insignia dvd remote code list for all types of universal remote codes here. You need select 4 digit, 5 digit, 3 digit, and all other type of remote codes for your universal remote brand as per its version. Like the most recent version of universal remote accepts 5 digit codes and the older version accepts 3 digit remote code for programming the control.

4 Digit Insignia DVD Player Universal Remote Codes

  • 2394
  • 2222
  • 2369
  • 2327

3 Digit Insignia DVD Player Universal Remote Codes

  • 096
  • 143
  • 292
  • 297
  • 091

One For All Universal Remote Codes For INSIGNIA DVD Player

  • 2394
  • 091
  • 2222

How to Program Insignia DVD player Universal remote?

Insignia dvd player can be programmed using keycode, code search, and manual search method if you perform the programming instructions correctly. Select a method and start programming with the remote codes.

Programming Insignia DVD Player Universal Remote With Keycode Method

Through the keycode method you can easily program Insignia DVD Player universal remote and also it find outs the component model you are using.

  1. “Turn on” the Device
  2. Tap the “TV” on “Insignia DVD Player Universal remote”.
  3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
  4. Now enter the “Keycode” which you find from above mentioned list.
  5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
  6. Release the “Power Button” when the screen turns off.

Programming Insignia DVD Player Universal Remote With Code Search Method

  1. “Turn on” your Device.
  2. Then Click & hold the “Setup” button
  3. Now enter “9-9-1”(3-digit code)
  4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming Insignia DVD Player Universal Remote With Manual Setup

  1. Place the device “Remote control facing Universal remote control you are willing to replace”.
  2. Click the “Setup key” or “Magic”.
  3. Enter “Code” from above provided list
  4. Tap any key of functions which you like to “Program”. Example- TV volume up.
  5. Now tap & hold the corresponding button on “Original Remote Controller”.
  6. Lastly, A light will “Blink” which means the program saved successfully.
  7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.


We hope you’ll find our article helpful for you to program universal remote for insignia dvd player. Don’t forget to write us your suggestions and new remote codes that are not available here.

Leave a Comment