One can take complete pleasure from the features of Haier TV using a universal remote. The Haier universal remote is very helpful when operating the Haier television set. This remote will offer you the best convenience in using the Haier TV but in case it get damaged or lost, you can use other universal remote using the Haier remote codes.
Haier Universal Remote Codes List
Any universal remote can operate the Haier TV using the Haier remote codes. Nothing to worry about if your Haier universal remote is lost or damaged. There is Haier universal remote codes list we are providing and you only have to match the brand of your device to make the programming work. We have a detailed list of Haier remote codes which you will find fitting to your device. If the first attempt failed, don’t worry because there will always be a Haier tv 3 digit code for universal remote that will work for your gadget. The universal remote for Haier tv using the accurate codes will operate your brand.
Haier Universal Remote 4 Digit Codes
0810, 0157, 0094, 0123, 0217, 0081, 0216
How to Program Haier Universal Remote
Programming any universal remote using the Haier tv code has never been easy with the below steps. There are different codes from the list which corresponds to your Haier tv. If the first code will not work, just keep trying until you will find the right one perfect to operate your device. From the number of codes on the list, there will one that is suited to work on your Haier tv. After you have entered the exact Haier tv remote code, you will experience that your device smoothly operates and works.
Below are the easy ways on how to program the Haier universal remote:
Programming Haier Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Haier Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
You will find popular universal remote in the market today and programming them with the right Haier tv codes will work well with your device. If you have questions regarding the Haier universal remote codes, feel free to leave a comment below. We hope that this post has helped you.