Funai TV Universal Remote Codes & Instructions

If you guys have recently purchased a Funai TV universal remote control and didn’t aware of the funai universal codes to handle your TV then our recent post might help you. We provide you the easiest process & programming instructions to program funai remote codes for your tv using codes like 3 digit code, 4-digit, and 5-digit universal codes.

Here we have listed down funai tv codes of all the available types that you can use to program your remote control and TV together with the appropriate methods. If one remote code doesn’t work with your device then try the same process again by using another code from the list and try until remote control programmed successfully for your device.

4 Digit Funai TV Universal Remote Codes

For all the funnai TV devices that accepts four digit remote codes for universal control, you can find the funai universal remote codes list here with all the updated codes:

• 0456
• 0227
• 0053
• 0042
• 0189
• 0051

3 Digit Funai TV Universal Remote Codes

If your funnai TV requires three digit code for universal remote then try using the code from this below given list.

• 155
• 053
• 198
• 189
• 051
• 042

5 Digit Funai TV Universal Remote Codes

Choose the five digit funai tv codes from the below list and program your universal remote control with easy to go access.

• 11963
• 11271
• 10171
• 10180

How To Program Funnai TV Universal Remote?

There are mainly three methods by which you can program your Funnai TV universal control. All these processes are very much similar to each other but you need to keep following the steps carefully so that your remote can be programmed successfully. Also, you need to use some codes from the given list that works perfectly for your device.

Programming Funai TV Universal Remote With Keycode Method

Through the keycode method you can easily program Funai TV universal remote and also it find outs the component model you are using.

1. “Turn on” the Device
2. Tap the “TV” on “Funai TV Universal remote”.
3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
4. Now enter the “Keycode” which you find from above mentioned list.
5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
6. Release the “Power Button” when the screen turns off.

Programming Funai TV Universal Remote With Code Search Method

1. “Turn on” your Device.
2. Then Click & hold the “Setup” button
3. Now enter “9-9-1”(3-digit code)
4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming Funai TV Universal Remote With Manual Setup

1. Place the device “Remote control facing Universal remote control you are willing to replace”.
2. Click the “Setup key” or “Magic”.
3. Enter “Code” from above provided list
4. Tap any key of functions which you like to “Program”. Example- TV volume up.
5. Now tap & hold the corresponding button on “Original Remote Controller”.
6. Lastly, A light will “Blink” which means the program saved successfully.
7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.

Conclusion:- 

We hope our funnai tv code list and this article may help you a lot to program your remote control. If you are missing any code here or want us to add new universal codes to our list then let us know via comment or contact section. This may help us to improve our site and serve you better.