Craig TV Universal Remote Codes & Instructions

Did you own a universal remote and want to set it up to operate your craig tv? Now you are at the right platform. Here on the same page we have mentioned each & every kind of craig tv remote codes for programming universal remote control. If you are thinking to setup universal remote for craig soundbar you need working remote codes that you can find here.  These craig tv remote codes are of mainly 2 digit, 3 digit, 4 digit, 5 digit remote codes that you have to use as per your universal remote requirements.

Below we have also updated craig tv programming methods with craig universal remote codes so that you can easily program your remote and enjoy streaming.

Craig TV Universal Remote Code List

  • 11822
  • 10073
  • 0073
  • 00073
  • 06222
  • 6222
  • 16222
  • 10180

4 Digit Craig TV’s Universal Remote Code List

If your universal remote accepts 4 figure remote codes then you may find working craig remote codes here in this list.

1484, 5038, 5049, 5184, 1038, 1044, 1941, 1380, 1036, 5062, 2191, 0906, 1035, 0053, 5040, 5041, 0805, 0180, 0042, 1045

Universal Remote Code For Craig Soundbar:

Check the below code list to program universal remote control for craig soundbar. All these codes are working remote codes by which you can easily setup your remote.

  • 00161

3 Digit  Craig TV’s Universal Remote Code List

Analyze and find out if your remote brand accepts 3 digit remote code, you will get working codes to operate your device from here.

009, 536, 038, 667, 282, 180, 662, 666, 533, 691, 694, 669, 541, 053, 037, 657, 542, 161, 042, 532, 064, 171, 963, 682

5 Digit Craig TV’s Universal Remote Code List

If you have purchased your remote recently, then it might accept 5 digit codes that are available below to program the control.

  • 10073
  • 06222
  • 11822
  • 00073
  • 10180
  • 16222

How to Program Craig TV’s Universal Remote

There are three primary methods that are code search, keycode, and manual setup programming method that you can used to program remote control for your device. You can easily program the control if you follow the process correctly and use working remote codes. If you are unable to program the remote using a code then keep try using the changed remote codes from the list.

Programming Craig TV Universal Remote With Keycode Method

Through the keycode method you can easily program Craig TV universal remote and also it find outs the component model you are using.

  1. “Turn on” the Device
  2. Tap the “TV” on “Craig TV Universal remote”.
  3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
  4. Now enter the “Keycode” which you find from above mentioned list.
  5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
  6. Release the “Power Button” when the screen turns off.

Programming Craig TV Universal Remote With Code Search Method

  1. “Turn on” your Device.
  2. Then Click & hold the “Setup” button
  3. Now enter “9-9-1”(3-digit code)
  4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming Craig TV Universal Remote With Manual Setup

  1. Place the device “Remote control facing Universal remote control you are willing to replace”.
  2. Click the “Setup key” or “Magic”.
  3. Enter “Code” from above provided list
  4. Tap any key of functions which you like to “Program”. Example- TV volume up.
  5. Now tap & hold the corresponding button on “Original Remote Controller”.
  6. Lastly, A light will “Blink” which means the program saved successfully.
  7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.


We hope you find our article useful for your craig tv device. So don’t forget to share your feedback and experience with us. This may give us boost to improve our user experience. Also please comment us if you have any working universal remote codes that are not available here so we can post them and forward to other needful aspirants.

Leave a Comment